One of the main benefits of a recliner is that it has an adjustable backrest that brings more comfort to an aching back. But this benefit might not be fully enjoyable if yourreclinertends to tilt back too much or too little for your convenience. Hence, knowing how to adjust a Lazy-Boy recliner is as important as buying one.
Different body types will apply different pressures. You might notice that your recliner is always a bit too soft.
You can easilyadjust your La-Z-Boy recliner by adjusting the tilt-back tension springson the bottom of the recliner or whatever adjustment mechanism is present. This allows you to adjust the pressure needed to recline the chair backward. As such, you can adjust to make reclining backward easier or more difficult.
Tools Needed
To provide maximum comfort, the best La-Z-Boy recliners for an individual should be adjusted to their body weight and body type. It is possible that the recliner mechanism may need to be repaired. If tension springs have to be adjusted or tightened, the following tools might be needed:
Pliers/multi-toolAlthough you can still use your hands to turn spring wing nuts with your hands, the multi-tool may be necessary if your hands are too large to fit in the available spaces. Even if your hands are small enough to fit the springs, they will get more difficult to turn the tighter the springs get. As such, the pliers could come in very handy.
FlashlightYou might need a little more lighting depending on where your recliner is located. Having a flashlight beside you would solve any problems you might have seen correctly. You could have someone hold the flashlight, or you could place it beside yourself.
Roll It Over
The recliner can be positioned so that the bottom is facing the ground. However, it cannot be adjusted or fixed in this position. You should place the recliner on the backrest or leg rest so that the bottom is visible.
Look for the tension spring s and identify the wing nuts that need to be adjusted. These should be easily spotted.
Adjust The Tension Or Loosen The Wing Nuts
The procedure for tightening these wing nuts is not much different from tightening or loosening a screw. To make it more difficult to recline, turn the wing nuts to the right. This will make the wingnut tighter.
If you want to make your La-Z-Boy recliner more comfortable to push back, however, the goal should be to loosen the wing nuts. Turning to the left will do the trick.
One of the most effective ways of balancing the tightening or loosening of the nuts while making it easier to assess the effect of turns is to make only half turns at a time and check on the effects of the turns until they are satisfactory.
It is also possible that your recliner might be old, and turning the nuts is only a short-term measure that would have to be repeated regularly. In that case, you should consider getting a replacement. TheEsright massage chair or theLarkinhurst recliner with signature design would make a good choice.
Dont Forget To Test It
As earlier stated, assess the effect of every half turn before making further turns. This isnt difficult; flip the recliner back into its normal position and see if the tension of the chair or the pressure required to tilt is more appropriate for your body type and weight.
If it is, then the tension springs in your recliner are perfect for you. However, if it’s not, flip it back and give it another half turn to both nuts.
Keep going with the flip, turn, and test routine until the recliner is just how you need it to be.
Pitch Adjustment
The pitch of the recliner refers to the height of its front when the recliner is in its upward position. It is as simple as changing the ease of recline.
To determine if the pitch of your recliner requires any adjustment, you should maintain a sitting position without reclining. If your feet don’t touch the ground, your pitch is too high. If your knees bend when you sit, your pitch is too low.
If the pitch of the recliner is too high, tilt the chair so that you can reach the bottom. Then, remove the cam bolts from the chair and slide the frame back and up, bringing it closer to the ground. However, if the pitch of the recliner is too low or short, slide the frame down and forward to push the front of the chair further away from the ground.
Each slot should offer a different setting. Pick the one that best satisfies you and test it to be sure.
